Furuno FS-1575 FS-2575 FS-5075 User Manual
10. NBDP TRANSMISSION, RECEPTION
10-9
10.7
Scanning
The radio equipment scans a group of operator-selected frequencies (channels), and
stops scanning when a signal is received. See section 8.5 for registeration of scan
group.
stops scanning when a signal is received. See section 8.5 for registeration of scan
group.
1. Press the function key F3 then the 5 key to open [Scanning Group List]. You can
confirm the scan channel by pressing the
↑ or ↓ key while pressing the Shift key.
2. Press the
↑ or ↓ key to select a scan group then press the Enter key. The scan-
ning starts and the indication "Scan" appears in reverse video. Further, the name
of the scan group appears in the [Station Name] field.
of the scan group appears in the [Station Name] field.
Communication status screen
3. Press the function key F3 then the 5 key to stop scanning. "Scan" disappears from
the communication status screen.
10.8
Communication Buffer
The communication buffer is a temporary memory which stores the transmitted and
received messages. To display the contents of the communication buffer, do the fol-
lowing:
received messages. To display the contents of the communication buffer, do the fol-
lowing:
1. If open, close the [Edit] window 1 or 2, pop-up, or menu.
2. Press the Pg Up or Page Up, or Pg Dn or Page Down key. The contents of the
2. Press the Pg Up or Page Up, or Pg Dn or Page Down key. The contents of the
communication buffer are displayed.
Press the P key while pressing the Ctrl key to print them. Press the function key F1
then the 9 key to erase the contents of the buffer. To erase the contents from the
screen, do one of the following:
then the 9 key to erase the contents of the buffer. To erase the contents from the
screen, do one of the following:
• Press the Pg Dn or Page Down key on the last page.
• Press the
• Press the
↓ key at the bottom line.
• Press the Esc key.
*
1 Coast Station A
2 Coast Station B
3 Coast Station C
Scanning Group List
10-Apr-2012 15:10:30 UTC Caps-Eng
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name : SAITO-1
Scan
Frequency (T/R) : 8344.00 / 8705.00(kHz) Comm Mode : Auto
Comm Status : Connect Send Lock Error
Sending Volume : 100(%) ARQ Error : 0 ARQ Time : 0(sec)