Furuno FS-1575 FS-2575 FS-5075 User Manual

8.  NBDP PREPARATIONS

1. Press the function key F5 then the 1 key to open the [Station Entry] screen.
2. Press the 

↓ key to select a station name from the [Station List].

3. Press the 

→ key then the ↓ key to select [Change] and press the Enter key.

4. Do one of the following;

Edit station: Use the 

↑, ↓ and the Backspace keys to make corrections.

Delete station: Erase station name with the Backspace key.

5. Press the Enter key twice.
6. Press the Esc key.

A built-in timer allows you to automatically receive and transmit files. 10 timer pro-
grams can be registered. To enable timer operation, see section 10.6.

1. Press the function key F5 then the 2 key to open the [Timer Operation Entry] 

screen.

2. If [Create] is not underlined, press the 

→, ↑ and Enter keys to underline it.

3. With [Operation] selected, enter a suitable operation name on the [Operation] line. 

Any alphanumeric characters can be used.
Note: If the operation name entered already exists, the message "Operation 
name already exists. Press any key to escape." appears. Press any key and 
change the operation name.

4. Press the 

↓ key to select [Station].

5. Press the 

→ key to display [Station List] (which you registered stations in the pre-

vious paragraph).

6. Press the 

↓ or ↑ key to select a station then press the Enter key.

7. Press the 

↓ key to select [Start Time]. Enter start time, in 24-hour notation. To 

have the operation start at 8:35 a.m., for example, the keying sequence would be
0 8 3 5 0 0.

Create

Change

Timer Operation Entry

Timer Operation List

Timer Operation Set Up

 :  

Station        :

Start Time     :  0: 00: 00

Stop Time      :  0: 00: 00

Receive/Send   : Receive Send

File to Send   :

Press the 

 key to show the station list, the file list.