Furuno FS-2570 (150W) User Manual

2  SSB RADIOTELEPHONE 

1.  At the radiotelephone screen, press the [#/SETUP] key. 
2.  Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob. 
3.  Rotate the [ENTER] knob to choose ENTRY and then push the [ENTER] knob. 
4.  Push the [ENTER] knob, rotate the [ENTER] knob to choose CH and then push the 

[ENTER] knob. 

5.  Enter channel number to process and then push the [ENTER] knob. 
6.  Tx and Rx frequencies are shown as “0.0 kHz”; push the [ENTER] knob to delete 

channel. 

7.  Press the [CANCEL] key twice to return to the radiotelephone screen. 
 
Deleting all user channels 

1.  At the radiotelephone screen, press the [#/SETUP] key. 
2.  Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob. 
3.  Rotate the [ENTER] knob to choose ERASE and then push the [ENTER] knob. 
4.  Rotate the [ENTER] knob to choose YES and then push the [ENTER] knob. 
5.  Press the [CANCEL] key to return to the radiotelephone screen. 
 
 

You may enable or disable FAX use as follows: 
 
1.  At the radiotelephone screen, press the [#/SETUP] key to open the Setup menu. 
2.  Rotate the [ENTER] knob to choose FAX RX ENABLE and then push the [ENTER] 

knob. 

3.  Rotate the [ENTER] knob to choose ON or OFF as appropriate and then push the 

[ENTER] key. 

MODE:   SSB          SIMP           HIGH

 

TX: 2182.0

KHZ

RX: 2182.00

KHZ

VOL

SEN

S

AGC : FAST

IA

0.0A

 

 

 

 

TLX
FAX
AM

 

4.  Press the [CANCEL] key to close the menu.